Quick Answer: How Do I Reset My AXIS P3225?

What is IP utility?

IP Utility is a free, Windows-based application tool with friendly user interface.

It helps you locate available devices including cameras, video encoders, and standalone NVRs in the network by showing its IP address..

How do I reset my AXIS m3045?

Reset to Factory Default SettingsDisconnect power from the product.Press and hold the control dutton and reconnect power. … Keep the control dutton pressed for 15–30 seconds until the status LED indicator flashes amder.Release the control dutton.More items…

How do I reset my Axis PTZ camera?

Axis Factory ResetDisconnect the camera from the power supply and ethernet.Remove the four screws securing the rear cover and remove it.Keep the Control button pressed while you restore the power supply.Hold down the button for about 15 seconds until the status LED is yellow flashing.Release the Control Button.

Is Axis companion free?

It’s ideal for small businesses and home users that require a straightforward video surveillance with easy access from mobile devices. Download Axis Companion application for free – choose either the PC, Android or iOS version from the table on the right.

How do I reset my IP camera?

If you forget the password, the only way is to reset the IP Camera to factory default setting via hardware reset button. To reset the IP Camera via the hardware reset button, please press and hold the reset button for more than 10 seconds and then all the settings will go to the default settings.

How do I reset my axis?

To reset the product to the factory default settings: 1. Press and hold the control button and the restart button at the same time. 2. Release the restart button but continue to hold down the control button for 15–30 seconds until the status LED indicator flashes amber.

How do I reset my axis companion recorder?

1. In AXIS Companion, go to and Cameras. 2. Click and then select Restore device.

What is IP camera activation password?

In earlier versions of the firmware (to version 5.3. 0) IP cameras HIKVISION supplied to IP address 192.0. 0.64 and the default password is 12345. … 0 and above before connecting to the network need to “activate” because they come from the factory without password (not active).

What is the default username and password for Axis cameras?

The default username for your Axis 2100 Network Camera is root. The default password is pass.

What is Axis default password?

The default user of an AXIS product is “root” and previously the default password was “pass”.

How do I reset my Axis 207w camera?

Enter the setup pages for your camera and in the left hand menu click ‘system options’ then ‘maintenance’. You will then be presented with the maintenance page which will show a button marked ‘Restore’. Click the ‘Restore’ button to return your camera back to factory settings.

How do I access my Axis Camera IP?

Configuring an Axis CameraConnect the camera. Connect the Axis camera to the computer using an Ethernet cable. … Configure computer IP address. Set your computer’s IP address to 192.168. … Launch the Setup Axis Camera Tool. … Setup the Camera. … Manual Camera Configuration. … Setup Page. … Configure Users. … Configure Image Settings.More items…•

How do I find my axis camera on my network?

Discovering Your Axis Camera With Your Room Alert Account To navigate to the camera’s Device Details page, select Devices in the navigation bar to the left in your Room Alert Account, and then select your camera from the device list. You may find the unit’s IP address listed under Local IP.

What is the default password for Avigilon cameras?

The camera’s default username and password is administrator without a password. It is recommended that you add a password as soon as possible to avoid security issues.

What is the default IP address of AXIS Camera?

The camera’s default IP-address (192.168. 0.90) can be used to configure it. Follow the instructions below: Reset your Axis camera or video encoder to the factory defaults as described in the Installation Guide.

How do I reset my axis camera remotely?

Remote reboot Axis IP cameraIn Windows open the Command Prompt.At the command prompt type in (without quotes) “FTP ”You should be now asked to enter a username. … Once you are logged into the camera type in this command press enter and re-type the command again and press enter again.